Experiencing the problem when a faucet in your house stops functioning properly brings on irritation and a larger bill. Thus, taking this situation head-on is a surefire way to reduce costs as well as gain new experience.
24 Hour Emergency Plumber
One of the solution to the problem described is to call a 24 hour emergency plumber, whose services are always available and can definitely make one of your worries vanish. The plumber is capable of fixing a faulty faucet as well as prevent other faucets in your house from start leaking. An additional check-up is really needed since you don’t want to spend more on additional repair works.
However, if you feel confident enough to take care of a broken faucet, there is no other way to prove it than do it yourself. Fixing a faucet isn’t the simplest thing ever, but if you pay attention to the recommendations below the process will be as easy as a pie. In doing so, you will also cut down the costs on additional services that could be easily avoided.
Leaky Shower Or Bathtub Faucet Repair
Fixing a shower or a bathtub faucet has a few stages that if followed carefully can ease the repair.
- Figure out where the problem area is. Pay attention to the dripping.
- After finding the problem, turn the main supply off (you may switch it off in the bathroom or in the basement).
Take the cap of the faucet off (it usually has a sign or reads either cold or hot). The cap has in the most cases a decorative function (can vary by design). Clean it up properly.
- Unscrew the inside screw carefully to get to the stem.
- Take the handle off. You may need a screwdriver to pry it loose very gently.
- Use a rotary tool to make holes around the socket. Pull the outer layer out of the wall.
- Put a faucet wrench that fits well, use an adjustable wrench to get to the bottom of the stem where a rubber washer is, which must have worn out. Unscrew it and change a rubber washer to a new one. Don’t screw it too tight.
Put the stem to its initial position using an adjustable wrench. Brush the dirt away. Put the handle on. Switch on the main supply.